Countertop Price Guide Singapore: Costs by Material (2026)
Prices checked October 2026 against the published price lists of 526 contractors listed on Homees, MOM's 2025 wage data and Qanvast's 2026 report. How we price →
Your kitchen countertop takes a daily beating — chopping, heat, spills — so it's worth getting right. In 2026, countertops in Singapore run roughly **S$30–S$60 psf for laminate**, **S$55–S$200 psf for quartz, solid surface and sintered stone**, and **S$40–S$250+ psf for natural granite and marble**. For a typical HDB kitchen, that's about **S$1,500–S$4,000+** installed.Here's the cost by material and how to choose.
Quick answer: Laminate is cheapest (~S$30–S$60 psf); quartz and sintered stone are the popular mid-premium picks (~S$70–S$200 psf); marble is the priciest and highest-maintenance. Most HDB kitchen countertops land at S$1,500–S$4,000 installed.
Countertop prices by material
| Material | Typical cost (psf, installed) | Notes |
|---|---|---|
| Laminate | S$30 – S$60 | Budget; wide designs; less heat/scratch resistant |
| Solid surface | S$55 – S$175 | Seamless, repairable; moderate heat resistance |
| Quartz (engineered stone) | S$70 – S$200 | Most popular; hard, non-porous, low-maintenance |
| Sintered stone | S$75 – S$200 | Very heat/scratch resistant; premium |
| Granite | S$40 – S$250 | Natural, heat-resistant; needs sealing |
| Marble | S$100 – S$250+ | Luxurious but porous, stains/etches — high upkeep |
Indicative 2026 ranges, material + fabrication + installation. Final price depends on slab grade, thickness, edge profile and cut-outs. See the countertop service on Homees.
What affects the price
- Material & grade. The biggest factor — from budget laminate to premium marble.
- Length & thickness. More running length and thicker slabs (20mm vs 30mm) cost more.
- Edge profile. Fancy edges (bullnose, mitred thick edge) add fabrication cost.
- Cut-outs. Sink, hob and tap cut-outs each add labour.
- Installation & access. Templating, transport and fitting; tricky access adds cost.
Which material should you pick?
- Quartz — the go-to for most Singapore kitchens: hard, non-porous, low-maintenance, huge range of looks. Our default recommendation for value + durability.
- Sintered stone — if you want maximum heat and scratch resistance (you cook a lot), and a premium finish.
- Solid surface — seamless joints and repairable; softer, so mind hot pots.
- Laminate — best for tight budgets; just keep it away from direct heat.
- Granite — natural and tough, but needs periodic sealing.
- Marble — stunning but porous; it stains and etches, so only if you'll maintain it (or use it somewhere low-traffic).
Planning the whole kitchen? See the Kitchen Renovation Cost Guide, and compare carpenters and countertop specialists on Homees.
Care by material (what you're really signing up for)
The purchase price is one decision; the next ten years of care is another:
- Quartz: the low-maintenance favourite — non-porous, no sealing. Just avoid direct heat: always use a trivet, as thermal shock can crack the resin.
- Sintered stone / porcelain: effectively heat-proof, scratch-resistant and UV-stable. The caveat is chipping on edges from hard knocks — and repairs are harder to make invisible.
- Granite: needs re-sealing roughly yearly; wipe acids (lime, vinegar, wine) promptly. Rewards you with genuine heat tolerance.
- Marble: beautiful and demanding — seal it, wipe spills immediately, accept that etching and patina are part of ownership. Better in dry kitchens and vanity tops than a heavy-wok kitchen.
- Solid surface: scratches show but polish out — the only material where light damage is genuinely DIY-fixable.
- Laminate: wipe-clean easy, but keep standing water away from seams and never cut on it directly.
If your kitchen does daily wok work, quartz or sintered stone will forgive you; marble will not.
How fabricators actually price your top
Quotes are per square foot, but the psf is not the whole bill:
- Cut-outs for the sink, hob and tap holes are charged per opening (S$50–S$150 each; undermount sink cut-outs cost more than drop-in).
- Edge profile — a simple eased edge is standard; bullnose, bevel or mitred-waterfall edges add per-foot-run charges.
- Upstands and backsplashes in matching stone are quoted as extra area.
- Slab seams: runs longer than ~2.4–3m need a joint — good fabricators place it where you'll never look.
- Template → fabricate → install takes about 7–14 days after carcass installation; the top is templated only once cabinets are level and fixed.
Get the psf rate and every extra itemised — two quotes with the same psf can differ by S$800 on the same kitchen once cut-outs and edges are counted.
Matching the top to how you cook
Be honest about your kitchen's workload before falling for a slab:
- Daily wok, heavy frying: sintered stone or quartz in a mid-tone — heat tolerance (sintered) and stain forgiveness matter more than veining.
- Weekend baking, light cooking: almost anything works; this is where marble owners get away with it.
- Rental or resale-prep: laminate or entry quartz — spend the savings on hardware buyers actually touch.
- Dry kitchen / island showpiece: this is the place for dramatic marble or full-veined quartz, away from oil and turmeric.
- Outdoor/BBQ counters: granite or sintered stone only — UV fades resin-based quartz and weather destroys laminate.
Bring home A4-size samples and live with them for a week: splash kopi and curry on the candidates, leave it an hour, and see what wipes clean. A S$30 sample test beats discovering your top's weaknesses after installation.
FAQ
How much does a kitchen countertop cost in Singapore? Roughly S$30–S$60 psf for laminate, S$70–S$200 psf for quartz/sintered stone, and S$40–S$250+ psf for granite and marble. A typical HDB kitchen countertop is about S$1,500–S$4,000 installed.
What is the most popular countertop material in Singapore? Quartz (engineered stone) — it's hard, non-porous, low-maintenance and comes in many designs, making it the default for most renovated kitchens.
Is quartz or sintered stone better? Both are excellent. Quartz is the all-rounder; sintered stone is even more heat- and scratch-resistant (good for heavy cooks) but usually pricier.
Is marble a good kitchen countertop? It's beautiful but porous — it stains and etches from acids and heat, so it needs careful maintenance. Many prefer quartz for a similar look with far less upkeep.
What's the cheapest countertop? Laminate, at around S$30–S$60 psf installed. It offers many designs but is less heat- and scratch-resistant.
Does the price include installation? Quoted prices usually include fabrication and fitting, but confirm cut-outs (sink/hob), edge profile and transport — these can be add-ons.
Prices are indicative 2026 market ranges and vary by material grade, length, thickness, edges, cut-outs and installer. Compare countertop specialists on Homees.
